更新时间：2020-09-25 11:12:22
封面
版权信息
中华人民共和国住房和城乡建设部公告
Foreword
1 Scope
2 Normative References
3 General Previsions
3.1 Design Condition
3.2 Foundation
4 Materials
4.1 General Requirements
4.2 Plates
4.3 Pipes
4.4 Forgings
4.5 Bolting Materials
4.6 Structural Shapes
4.7 Welding Consumables
4.8 Foreign Materials
5 Design
5.1 General Requirements
5.2 Design of Bottoms
5.3 Design of Sidewalls
5.4 Design of Roofs
5.5 Design of Roof Knuckle Regions and Compression-ring Girders
5.6 Anchorage
5.7 Openings and Reinforcements
5.8 Flush-type Shell Connection
6 Pre-fabrication，Erection and Welding
6.1 General Requirements
6.2 Welding
6.3 Thermal Stress Relief
7 Inspection，Examination，Testing and Acceptance
7.1 General Requirements
7.2 Porosity Limits
7.3 Non-destructive Test
7.4 Pressure Test
8 Pressure and Vacuum-relieving Devices
8.1 General Provisions
8.2 Pressure Limits
8.3 Pressure Setting of Safety Devices
Appendix A（Normative） Suggested Practice Regarding Foundations
A.1 General Requirements
A.2 Requirements for Foundation Dimensions
Appendix B（Informative） Example for Calculation of Steel Welded，Low-pressure Storage Tanks
B.1 Free-body Analysis
B.2 Computation of Unit Forces
B.3 Wall Thickness Computation
B.4 Computation of Compression-Ring Girders
Explanation of Wording in This Standard
Explanation of Provisions
Notes to Revision
5.7 Opening and Reinforcements
